Taking an old cigar box and an old sweater, you can make a great ring holder that not only organizes your rings, it protects them as well. What you end up with is a ring display that looks a lot like what you see in the jewelry store, only a lot cheaper. This project is easy and only takes about an hour or so from start to finish. You end up with a place where you can slide your rings in to keep them from being lost or knocked around in the jewelry box. You could also use this to stick your stud earrings in and keep them from being misplaced.

DIY Lace Ring ~ This dainty lace ring is not only pretty, but so simple to make.  Only two items are needed, ribbon lace and fabric stiffener. Lace Doily Ring ~ Accent any outfit with these adorable doily rings.  If you don’t want to use a doily you can use lace or crochet trim.  They would make wonderful Christmas or birthday presents for tweens, teens and women.
An old Jenga game is the perfect place to begin organizing your jewelry. If you don’t have an old Jenga set, you can pick them up for less than $10 and they make a really neat looking display for your necklaces. Paint or decorate the wooden blocks if you want and then just put them together, holding them in place with strong glue. Hang it on the wall and you have a really modern looking necklace holder that is as fun to make as it is functional to use and it will keep those necklaces from tangling in the jewelry box.

I just used this to clean mine and my husband’s silver wedding bands. This stuff is great. Our bands were looking pretty dingy and we bought some professional silver cleaner and it made them look worse. I was horrified, but then I found this recipe, tried it, and had success. I cut the recipe in half since I was just cleaning two rings. It apparently didn’t change the cleaning power because they haven’t been this shiny in forever! Thanks for posting the recipe. Will use from now on!
Hello lovely crafting people! If you are bored making those common things repeatedly and want to try something new for your crafting interest then you are at the right place at right time. You would be glad to know that there is new crafting challenge for you all to test your handy skills with. The source of this innovative crafting session is something unusual especially for girls but the things it is capable to make are huge girly delight. We are talking about the wire wrapping to make some awesome jewelry designs with this technique and enjoy the funkiest and coolest jewelry pieces than ever. And to provide you the best ideas in this regard and that too with complete crafting details we have made a collection.
Pegboards are great for organizing just about anything and jewelry is certainly no exception. A piece of pegboard is really cheap and you can use it to create a beautiful jewelry organizer that will hold all of your necklaces, rings, earrings, and bracelets. Just frame the pegboard (if you want) and then add hooks, cups, small baskets, and anything else that you need to keep that jewelry organized. You can hang necklaces from hooks and use plastic cups or baskets to keep your rings organized. Really, there are so many ways that you can put a pegboard to work keeping things organized.

Turn an ordinary picture frame into a great looking jewelry organizer! The process is pretty simple, remove the back parts of picture frame that help it to stand alone and just paint the cardboard and refit again! Paint the cardboard in paint colors you like and finish with a gold leaf as shown! Now you can start using it as a jewelry organizer!
I tried this and it worked great for some of my pieces (all are 925 silver from Tiffany) but one of my necklaces actually turned darker. Tried the solution two more times and left it to soak, tried to use a polishing cloth after the solution under running water and no change. So bizarre because it worked like magic on all my other silver. Thoughts?
The first evidence you’re going to have that this homemade jewelry cleaner worked will be all the stuff floating around in your vinegar/tea tree oil liquid. The last time I put my jewelry in this mixture I didn’t think it was too dirty, and it didn’t exactly need cleaning. Within just a few minutes, though, there was so much stuff floating around in the water that I was appalled.
Now this is a great jewelry storage project. Not only is it easy and relatively cheap, you get enough room to store all of your jewelry and then some. It’s a hideaway jewelry cabinet that has a mirrored door and it fits perfectly wherever you have room on the wall. It’s got hooks for everything and will seriously hold tons and tons of jewelry and keep it perfectly organized. Imagine having your own jewelry cabinet and not having to shell out a couple hundred bucks for it. Plus, the mirror is good for trying on jewelry to make sure that it matches what you’re wearing.
i work in precious metals so i have used rubbing alcohol, just put gold or silver in a jar, with the rubbing alcohol and wait overnight. there should be a drastic difference in shine and clarity. it does work for all types of jewelry and precious metals except for pearls and rhodium. definitely do not use this stuff on rhodium. it may cause an explosion, just maybe with rhodium.
This works great, but be careful with gem stones. Some of them like amethyst and emerald and any others which are in the quartz family are heat sensitive. Just put them in once the water has cooled down some. Cubic Zirconia are fazed by anything. They are lab grown under high heat and pressure. I fire them in a kiln at 1650 degrees in silver metal clay jewelry, and they are bothered at all.
Fabric Wrapped Earrings ~ This step-by-step picture tutorial is wonderful.  I especially love it because if I’ve done my math correctly then I believe you can make these earrings for about a buck a pair!  {{score}}! 12.  DIY Lace Earrings ~ These lovely earrings add femininity and charm to your outfit!  The desired lace pattern was cut from lace trim.  Show off how stunning they are with your hair pulled up in a bun or pony tail.
I tried this and it worked great for some of my pieces (all are 925 silver from Tiffany) but one of my necklaces actually turned darker. Tried the solution two more times and left it to soak, tried to use a polishing cloth after the solution under running water and no change. So bizarre because it worked like magic on all my other silver. Thoughts?
A piece of radiator grate in a frame is perfect for holding those dangling earrings. You just have to cut the grate to fit your wooden frame, assemble it and then hang up your earrings. These are great because they are so decorative and you can paint them if needed so that they match your bedroom décor. You could make a few of them if you have loads of earrings to hang or think about using them as gifts for other girls you know that need to get those dangly earrings organized.

Presto! This works like MAGIC! I’m a jewelry-maker, and sometimes generous friends bestow me with old costume jewelry that I love to take apart and repurpose. I received just such a lot the other day, but the pieces I was interested in were dull and discolored and tarnished. Since I didn’t pay anything for them, and since they were useless to me in their present condition, I figured I’d try this.
When your favorite bling just doesn't have the same sparkle, instead of purchasing expensive cleaning solutions or bucking out for a professional scrubbing, try this easy DIY jewelry cleaner. Using ingredients you already have in your pantry, this concoction costs pennies to make and doesn't use any harsh chemicals — just the power of science. And you can give your old toothbrush a new life by gently scrubbing jewels postsoak. Before you know it, your special gems will be dazzling.
If the jewelry is very dirty or very tarnished – like silver or gold – then you may need to repeat the process so just add a little more baking soda and more boiling water – but make sure it’s boiling, that’s key!  You can also use a toothbrush to get in all the nooks and crannies of detailed jewelry. Be careful with precious gems, stones and metals.
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.
×