A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
Pegboards are great for organizing just about anything and jewelry is certainly no exception. A piece of pegboard is really cheap and you can use it to create a beautiful jewelry organizer that will hold all of your necklaces, rings, earrings, and bracelets. Just frame the pegboard (if you want) and then add hooks, cups, small baskets, and anything else that you need to keep that jewelry organized. You can hang necklaces from hooks and use plastic cups or baskets to keep your rings organized. Really, there are so many ways that you can put a pegboard to work keeping things organized.
You can run out and buy a jewelry box but why would you when you can DIY it? This is a great project and one that gives you room to store all of your jewelry in one place. There are hooks for your necklaces and bracelets, a place to hang earrings, and even a small shelf where you can keep bowls for rings and earring studs. This is the perfect jewelry organizer and one that you can completely make from scratch, and with just a few supplies. You’ll need wood of course and a few other key materials. What you end up with is jewelry storage that looks like something expensive. Only you will know it’s a DIY project.
DIY: Lovely Pinboard {Jewelry} ~ This lovely pinboard can be used as a jewelry board too. Made out of wood, cork and fabric, this simple and inexpensive gift is perfect for the jewelry lover. 71.   Button Earring Holder ~ Keep your earrings organized with this simple trick, buttons.  It’s an easy and inexpensive way to keep your dangling and stud earrings from getting lost.  Simply glue the buttons onto organza ribbon and pierce the backs of your earrings through the button holes.  Once you have paired your earrings together you can roll up the ribbon and you are set for traveling. 72.  Frame Jewelry Holder {DIY} ~ Use a little spray paint and chicken wire to turn old frames into a beautiful way to organize and display jewelry.  It can also double as a message board or a way to display your childrens art.
Your jewelry will be noticeably cleaner after just the soak. It will even be disinfected, too. Adding the baking soda scrub at the end will ensure that you get everything clean, especially in all the little crevices. If your kitchen faucet has a high-pressure setting, that will be the best thing to use for rinsing your jewelry. Just make sure you hold on tight, because searching for lost objects in the sink trap or garbage disposal is one of the least pleasant tasks in the world. Take my word for it. Consider using a strainer.
Get creative with the pinewood stripes and hardwood plywood to install ultimate DIY jewelry organizer just like this inset jewelry cabinet! Here both cabinet and its hinged door have been planned for stylish storage and display of jewelry items! Don’t forget to install a ring tray inside for cool ring collection display! This self-made wooden cabinet is just like the bathroom cabinet and comes with the mirror-paneled door!
Taking an old cigar box and an old sweater, you can make a great ring holder that not only organizes your rings, it protects them as well. What you end up with is a ring display that looks a lot like what you see in the jewelry store, only a lot cheaper. This project is easy and only takes about an hour or so from start to finish. You end up with a place where you can slide your rings in to keep them from being lost or knocked around in the jewelry box. You could also use this to stick your stud earrings in and keep them from being misplaced.

A magnetic board and a few magnetic hangers will give you the perfect place to hang and keep all of your jewelry organized. You can paint the board and the hangers to match your décor and they are perfect for holding necklaces and bracelets. The hangers are just a few dollars each at Wal-Mart and you can find the magnetic board at any office supply store. Or, if you have an old board that you aren’t using, you’re halfway there and you can just add the hangers to keep your jewelry within reach and untangled at all times.


You can run out and buy a jewelry box but why would you when you can DIY it? This is a great project and one that gives you room to store all of your jewelry in one place. There are hooks for your necklaces and bracelets, a place to hang earrings, and even a small shelf where you can keep bowls for rings and earring studs. This is the perfect jewelry organizer and one that you can completely make from scratch, and with just a few supplies. You’ll need wood of course and a few other key materials. What you end up with is jewelry storage that looks like something expensive. Only you will know it’s a DIY project.
The framed jewelry organized featured on monaluna is both elegant and practical. Notice that it has a thin storage tray at the bottom. It’s useful for storing pendants, rings and other small jewelry pieces and accessories. We also like the fact that the frame and the back panel were painted all white. If you want, you can use some sandpaper to create a distressed, vintage look.
An old frame can be repurposed into a necklace holder and in case you can’t find a suitable frame you can always build one from scratch using a plywood panel and some scrap wood pieces. You’ll also need some fabric but you can also use paper if you want. In any case, you that to cover the plywood panel so you can have a clean backdrop for the necklaces to contrast with.
I even cautiously tried the leftover solution on a costume jewellery pair of earrings (I DON’T recommend anyone else reading this to try this though as your jewellery could be very different quality to mine!) and it worked to remove the last bits of tarnish off the chain- already used baking soda on it before and most of it was shiny as new, but this last method completely removed everything else. My costume jewellery was made of very good metal and handiwork so the solution did not damage my jewellery. Thank you so much again for such invaluable tips and advice!
Prefer the dollar store items also to install vintage inspired and precious shabby chic DIY jewelry organizer! Install earring pyramid using brass tubes and wire! Go handmade also with polymer clay to make artful jewelry organizer like the given cactus jewelry organizer! Make use of concrete, paper mache and also that of plaster to make every stunning jewelry dishes for free! More unique DIY jewelry organizer you can build with your own hands is waiting for your below! Give your worthy 2 minutes to a short roundup of these individual handmade DIY jewelry organizer!!!
×