For starters, consider repurposing a spice rack into a necklace holder. It would be an easy transformation. All you’d need to do is stain or paint the rack and then screw in some hooks. When you’re done, install it on the wall. IKEA Bekvam racks have this rod that can come in very handy when hanging necklaces or bracelets.

Here is the faux vintage china jewelry display! Just imagine these vintage dishes holding your jewelry on the wall next to your closet! They are all easy to make! Mount the temporary rose tattoos on the dollar store china plates and mound gold crystal to entire rim of the plate at the same time! In case of cup, fill it with piece of foam finish the foam with a felt overlay! Now add the cup to plates for an all breath-taking display or jewelry organizer!
I just tried this on my Tiffany’s heart and ball chain and realized after I started boiling the water I was out of baking soda…put the vigenar and salt in the boiling water anyways and poured into the pan. Wosrt thing that I figured could happen would be it wouldn’t work and I wasted a little vinegar and water..as i pourd the steaming hot liquid into the pan I WATCHED it get cleaned instantly. This works without the baking soda! I wished I had taken a video of it! Coolest thing to see happen! Thank you!

Turn an ordinary picture frame into a great looking jewelry organizer! The process is pretty simple, remove the back parts of picture frame that help it to stand alone and just paint the cardboard and refit again! Paint the cardboard in paint colors you like and finish with a gold leaf as shown! Now you can start using it as a jewelry organizer!
I just tried this on my Tiffany’s heart and ball chain and realized after I started boiling the water I was out of baking soda…put the vigenar and salt in the boiling water anyways and poured into the pan. Wosrt thing that I figured could happen would be it wouldn’t work and I wasted a little vinegar and water..as i pourd the steaming hot liquid into the pan I WATCHED it get cleaned instantly. This works without the baking soda! I wished I had taken a video of it! Coolest thing to see happen! Thank you!
An old embroidery hoop and a few strips of lace give you the perfect place to hang and organize your earrings. You don’t even have to glue this one. Just separate the hoop and place the lace ribbon inside before putting it all back together. The hoop hangs perfectly on the wall and you can add as much lace as you need to keep all of your earrings organized. It’s beautiful, easy to make, and best of all, cheap. You can literally make one of these in about five minutes and if you have the hoop and lace on hand, it won’t cost you anything. You could also use strips of fabric if that’s what you have.
This is a magic recipe! I am on a lot of medication and it doesn’t t take long before my silver jewellery becomes tarnished. So annoying! I tried your recipe after discarding a lot of others that did a part-cleaning job so I must admit I was a bit skeptical. To my delight everything I cleaned came out shining and sparkly. I’ve used it on gold, diamonds, emeralds, amethysts but would not use it on pearls.
Witch hazel is slightly acidic, and vinegar much more so, but either will work for soaking your jewelry. This cleaning method is intended for jewelry with sturdy stone settings (I wouldn’t use it for opals, pearls, or tanzanite, for example), and that is especially important to keep in mind if you’re using vinegar. Witch hazel is certainly the milder of the two, so use whichever ingredient you feel comfortable with.
Read Before You Start!: Gather your ingredients and line your pan with a sheet of foil (shiny side up). Lay out your dirty jewelry and have each part of the jewelry touch the foil. Not sure why this is important, but apparently it is. (Note: I cleaned my silver, 14k white gold and even a diamond ring without any problems. I don’t recommend using this cleaner on stones like opals and pearls. Not sure what the reaction would be to these types of natural stones.)
Leather Wrap Bracelet {Bracelets} ~ Check out this stylish leather wrap bracelet tutorial! With great step-by-step directions you’ll be wearing this fabulous bracelet in no time! Since your making it yourself you can customize the color and size! 31.  Rhinestone and Rope Bracelet {Bracelets} ~ How cute is this bracelet?! Using this tutorial you’ll learn how to easily create this trendy bracelet made with rhinestones and rope. So neutral that it will go with almost anything! 32.  Safety Pin and Sequin Bracelet DIY {Bracelets} ~ This bracelet is gold and sparkle and oh so stylish! Best of all it’s easily made from safety pins, sequins and a gold chain! Follow the great tutorial to learn how to make one of your very own! 33.  DIY Jeweled or Beaded Bracelet {Bead} ~ Need a beautiful accessory to wear with just about anything? This is a fabulous tutorial featuring two different ways to create either a beaded or jeweled or both bracelet. Easy to make and super stylish! 34.  Pressed Penny Bracelet ~ This pressed penny bracelet is such a fantastic  gift idea and amazingly cute!  It seems like our children always like to collect these from various places that we have gone to.  Since the pennies have been pressed down they are thin and easy to punch a hole in.  You don’t have to be a jewelry maker to do this one, plus you can make a gift with sentimental value.  Yay! Easy Chunky Cuff Bracelet – Look at how fab-u-lous these chunky cuff bracelets are!  They are the perfect bracelet because they are adjustable and fit any size wrist.  The cuff bracelet and the pendant were bought at Michael’s and cost under $10.
For starters, consider repurposing a spice rack into a necklace holder. It would be an easy transformation. All you’d need to do is stain or paint the rack and then screw in some hooks. When you’re done, install it on the wall. IKEA Bekvam racks have this rod that can come in very handy when hanging necklaces or bracelets.
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
If you have a few pieces of chicken wire on hand, you can create an absolutely stunning hanger for your earrings and other jewelry. You’ll need a one-by-two foot piece of chicken wire as well as a few pieces of wood to build the frame. The framed holder hangs with a piece of ribbon or whatever you want to use to hang it and it costs only about $2 to make. Plus, it’s relatively easy and will hold loads of jewelry. Add a few small nails or hooks to the wooden part for holding necklaces and bracelets and your earrings will just hang across the wire in the center.
You can create an absolutely gorgeous jewelry display with a few cheap plastic plates and cups, some temporary tattoos and a few other supplies. The gist of this one is to make those cheap plates and cups look like vintage china, which is done with floral temporary tattoos. Once you have that accomplished, you can fill the cups with foam for sticking earrings and use command hooks or some decorate push pins on the plates to hold necklaces and bracelets. You really have to see this one. You’ll find it hard to believe that they started out as cheap plastic.
DIY Vintage Lace Bracelet ~ This Anthropologie inspired bracelet is more stunning than the original!  The lace and pearls embroidered on vintage lace is pure perfection. 44.  Victorian Cuff Bracelet ~ This is a great project to use up some of your lace and trimming scraps.  The layers of fabric, lace, ruffle trim and ribbon with a button closure is simply stunning and chic.  Plus, who wouldn’t love a cuff for Christmas? 45.  Doily Cuff Bracelet DIY ~ This is a great tutorial where you’ll learn how to take a doily and turn it into a beautiful cuff bracelet! A stylish way to accessorize your outfits!
Fabric Wrapped Earrings ~ This step-by-step picture tutorial is wonderful.  I especially love it because if I’ve done my math correctly then I believe you can make these earrings for about a buck a pair!  {{score}}! 12.  DIY Lace Earrings ~ These lovely earrings add femininity and charm to your outfit!  The desired lace pattern was cut from lace trim.  Show off how stunning they are with your hair pulled up in a bun or pony tail.
You can create an absolutely gorgeous jewelry display with a few cheap plastic plates and cups, some temporary tattoos and a few other supplies. The gist of this one is to make those cheap plates and cups look like vintage china, which is done with floral temporary tattoos. Once you have that accomplished, you can fill the cups with foam for sticking earrings and use command hooks or some decorate push pins on the plates to hold necklaces and bracelets. You really have to see this one. You’ll find it hard to believe that they started out as cheap plastic.
Here's a space-saving trick: Opt for an open-face box that you can mount right onto the wall. When a shadow box is unavailable, any well-chosen crate, bin, or orphaned drawer can be retrofitted with a variety of hooks and knobs, turning your earrings and chains into objets d'art. Small decorative bowls perched on the box's lower ledge corral rings, pins, and brooches and complete the charming trinket tableau.
Presto! This works like MAGIC! I’m a jewelry-maker, and sometimes generous friends bestow me with old costume jewelry that I love to take apart and repurpose. I received just such a lot the other day, but the pieces I was interested in were dull and discolored and tarnished. Since I didn’t pay anything for them, and since they were useless to me in their present condition, I figured I’d try this.

This is a magic recipe! I am on a lot of medication and it doesn’t t take long before my silver jewellery becomes tarnished. So annoying! I tried your recipe after discarding a lot of others that did a part-cleaning job so I must admit I was a bit skeptical. To my delight everything I cleaned came out shining and sparkly. I’ve used it on gold, diamonds, emeralds, amethysts but would not use it on pearls.


Seashells are one of the best natural materials to make jewelry as they are very cheap and look awesome. Besides, you can find seashells when you go to the beach. Take two shells and make holes in shells and attach 2 jump rings and 2 earring hooks. The final step is to glue pearls. Done! You can use different kinds of shells and pearl beads for more variation. Also, you can use beads to decorate earrings.
There are a number of ways that you can make a jewelry tree and they are perfect for hanging your bracelets or necklaces. For the simplest version, just grab a nice twig from the yard and stick it in a vase. Voila! You have necklace storage that costs nothing and literally takes about two minutes to make. You can also be a bit more crafty and create a beautiful tree that will hold necklaces, bracelets, and even rings if you want to take a bit more time. A jewelry tree looks great wherever you sit it and really does help to keep your jewelry organized.
We would wish to clone this project if you want a stylish, dust-free and secure jewelry organizer! Use the wood in stock to build a DIY jewelry organizer with custom storage compartments and columns! Now use an old crib-side to install the door to it! Install crib side as door using hinges and don’t forget to write custom quotes over it! Would gift a perfect gift for a wife!
×