Old wooden set trays can be next on your dressing room wall as ultimate DIY jewelry organizer! If not available in home, visit the nearby dollar store to gain a wooden set tray and just recondition it and also add it up with some hooks for necklace hanging purposes! Bundles of columns and compartments will give the user so many options to store his jewelry without making a mess!
When you’re organizing jewelry, you certainly can’t forget about the little girls in your life. This kids’ organizer is perfect for little necklaces and bracelets and it’s very easy to make. You’ll need wooden pegs and a frame, which you can get for around $1 each and something to fill in the center. We love the idea of using an old loom to create a place in the center for hanging earrings. This is a really easy project and one that your little one can help you to make and decorate. Just add a little paint or decoupage some pictures on the frame.

be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.


I just tried this on my Tiffany’s heart and ball chain and realized after I started boiling the water I was out of baking soda…put the vigenar and salt in the boiling water anyways and poured into the pan. Wosrt thing that I figured could happen would be it wouldn’t work and I wasted a little vinegar and water..as i pourd the steaming hot liquid into the pan I WATCHED it get cleaned instantly. This works without the baking soda! I wished I had taken a video of it! Coolest thing to see happen! Thank you!
If you have a few pieces of chicken wire on hand, you can create an absolutely stunning hanger for your earrings and other jewelry. You’ll need a one-by-two foot piece of chicken wire as well as a few pieces of wood to build the frame. The framed holder hangs with a piece of ribbon or whatever you want to use to hang it and it costs only about $2 to make. Plus, it’s relatively easy and will hold loads of jewelry. Add a few small nails or hooks to the wooden part for holding necklaces and bracelets and your earrings will just hang across the wire in the center.
If the jewelry is very dirty or very tarnished – like silver or gold – then you may need to repeat the process so just add a little more baking soda and more boiling water – but make sure it’s boiling, that’s key!  You can also use a toothbrush to get in all the nooks and crannies of detailed jewelry. Be careful with precious gems, stones and metals.

I even cautiously tried the leftover solution on a costume jewellery pair of earrings (I DON’T recommend anyone else reading this to try this though as your jewellery could be very different quality to mine!) and it worked to remove the last bits of tarnish off the chain- already used baking soda on it before and most of it was shiny as new, but this last method completely removed everything else. My costume jewellery was made of very good metal and handiwork so the solution did not damage my jewellery. Thank you so much again for such invaluable tips and advice!


Read Before You Start!: Gather your ingredients and line your pan with a sheet of foil (shiny side up). Lay out your dirty jewelry and have each part of the jewelry touch the foil. Not sure why this is important, but apparently it is. (Note: I cleaned my silver, 14k white gold and even a diamond ring without any problems. I don’t recommend using this cleaner on stones like opals and pearls. Not sure what the reaction would be to these types of natural stones.)
This works great, but be careful with gem stones. Some of them like amethyst and emerald and any others which are in the quartz family are heat sensitive. Just put them in once the water has cooled down some. Cubic Zirconia are fazed by anything. They are lab grown under high heat and pressure. I fire them in a kiln at 1650 degrees in silver metal clay jewelry, and they are bothered at all.
Keeping your costume jewelry in excellent shape is easy. All it takes is a little bit of time and some effort. If you wear your pieces every day, you will need to clean it more often. To get your costume jewelry looking like new, you need to find a good cleaning solution. It is essential you avoid cleaners that contain acids and alcohols, like vinegar and ammonia as they can damage the materials in the jewelry.
If you happen to be replacing your staircase spindle, you’ve got the makings for the perfect jewelry holder. Even if you don’t have a spare spindle sitting around, you can pick them up really cheap at yard sales, flea markets, or any number of thrift stores. You’ll need a round piece of wood to hold the spindle up and some wire for hanging your jewelry. This is a beautiful jewelry organizer that you can paint or stain any color you need to match your décor and it’s really easy to make. The wires stick out in different places, giving you the perfect place for hanging all of your longer jewelry pieces.
Sort out an old picture frame from home trash store and just cover it up with a decorative metal sheet! Install some knobs and hooks over to gain a stylish jewelry organizer without spending even a single penny! This would also make a pleasing gift for a style loving women! Primer and paint can be used to personalize the final visual!

It is irritating always for style lovers to find their necessary jewelry items tangled! If you have also tired of digging through drawers while sorting out a special jewelry item then time to make your own custom DIY jewelry organizer! Here is a thrifty and stylish one to draw your attention! Grab some paper or wooden dowels and those old candlesticks to duplicate it now!
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often. 
×