An old wooden coat hanger can be transformed into the perfect jewelry organizer with a few small hooks and maybe some decorative ribbon. First, decorate the hanger however you want, if you want. Then add tiny command hooks for holding necklaces and bracelets. You can stick the hooks into the wood all the way around the hanger and even on both sides if you want. You get loads of space for hanging your jewelry and a wooden hanger will cost only a few cents at thrift stores so this is a really cheap project as well.
Every fashion enthusiast will love these diy jewelry ideas as they offer no expensive supply materials! Most of the needed items will be available in home or at a dollar store! After you browse the whole collections of these smart DIY jewelry ideas, you will be able to make your own stunning bracelets, mesmerizing bangles, exotic earrings and very stylish necklaces!
Over time, you may notice that your silver jewelry is looking tarnished and you have wondered how to clean a silver necklace or bracelet. Jewelry tarnishes because the sulfur that is present in the air creates a chemical reaction to the silver. This homemade silver cleaner is simple to make and won’t cost you a ton of money because most of the ingredients are ones you probably already have in your pantry.
An old frame can be repurposed into a necklace holder and in case you can’t find a suitable frame you can always build one from scratch using a plywood panel and some scrap wood pieces. You’ll also need some fabric but you can also use paper if you want. In any case, you that to cover the plywood panel so you can have a clean backdrop for the necklaces to contrast with.
If you happen to be replacing your staircase spindle, you’ve got the makings for the perfect jewelry holder. Even if you don’t have a spare spindle sitting around, you can pick them up really cheap at yard sales, flea markets, or any number of thrift stores. You’ll need a round piece of wood to hold the spindle up and some wire for hanging your jewelry. This is a beautiful jewelry organizer that you can paint or stain any color you need to match your décor and it’s really easy to make. The wires stick out in different places, giving you the perfect place for hanging all of your longer jewelry pieces.
I just tried this on my Tiffany’s heart and ball chain and realized after I started boiling the water I was out of baking soda…put the vigenar and salt in the boiling water anyways and poured into the pan. Wosrt thing that I figured could happen would be it wouldn’t work and I wasted a little vinegar and water..as i pourd the steaming hot liquid into the pan I WATCHED it get cleaned instantly. This works without the baking soda! I wished I had taken a video of it! Coolest thing to see happen! Thank you!

A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
Stella & Dot Rhinestone Earrings {Knock-off} ~ Diamonds are a girls best friend, right?!  We never said that they had to be the real mccoy.  These rhinestone earrings are amazing.  Two different sized rhinestone chains and different lengths of link chain were used for added dimension. 9.  DIY Fringe Earrings ~  Who would have thought that using fringe for earrings could look so beautiful?!  Genius, right?!  Alison designed these lovelies said that you can buy the fringe in an array of colors at the fabric store, or you can dye white fringe to your desired shade.
DIY: Lovely Pinboard {Jewelry} ~ This lovely pinboard can be used as a jewelry board too. Made out of wood, cork and fabric, this simple and inexpensive gift is perfect for the jewelry lover. 71.   Button Earring Holder ~ Keep your earrings organized with this simple trick, buttons.  It’s an easy and inexpensive way to keep your dangling and stud earrings from getting lost.  Simply glue the buttons onto organza ribbon and pierce the backs of your earrings through the button holes.  Once you have paired your earrings together you can roll up the ribbon and you are set for traveling. 72.  Frame Jewelry Holder {DIY} ~ Use a little spray paint and chicken wire to turn old frames into a beautiful way to organize and display jewelry.  It can also double as a message board or a way to display your childrens art.
DIY Confetti Earrings ~ Create your own gorgeous paper confetti earrings with a few items.  All you need is a hole punch, hot glue, thin wire and earring hooks.  They are definitely delicate, but who cares when you paid next to nothing for them. 15.  How to Make Paper Earrings ~ Colorful dangly earrings are a fun accent to any outfit.  They are even better when they are light weight and don’t pull on your ear lobes.  These amazing earrings are made from card stock.  You can cut your desired shape from a paper punch, Cricut or Silhouette and add a layer of crystal accents.
Untangle your necklaces and pair up your earrings for the last time. Instead of a drawer full of gems and gold and silver pieces scattered throughout the house, swap the clutter for a jewelry holder from HSN. Whether you only have a few pieces to keep straight or enough jewelry to wear something different every day of the year, the right jewelry storage is here at your fingertips. Get a jewelry storage organizer hidden behind a mirror, which swings open to reveal an organizational marvel that will keep your pieces in place. Or, go for a small box with padded drawers and a space for everything, which sits elegantly atop your vanity. HSN offers jewelry holders from top brands, and you can always expect quality construction and materials. After all, your jewelry is an important part of your personal fashion, and you also want to protect your valuable pieces. Need to find the perfect birthday or holiday gift for a woman in your life? If she's always got earrings on, bracelets jangling, or rings embracing her fingers, consider a jewelry organizer from HSN. The journey to the perfect gift begins when you shop today.
Some old drawer pulls and other hardware can be attached to a board to give you the perfect place for keeping all of your jewelry organized. You need a board, which you can paint or stain any color that fits your current décor. Then just take those old drawer pulls, hinges, and knobs (which incidentally, you can pick up at yard sales and thrift stores for a steal) and attach them in different ways. Create a pattern or just put them wherever you think they’ll work best. You get a beautiful place to store and display all of your jewelry and for very little cost.
Select a mild cleaning agent for your homemade jewelry cleaner recipe. Dish soap with grease-cutting properties can be used, but skip dish soap with harsh anti-bacterial properties as this can strip the finish off jewelry surfaces. Dish soap is a good idea for semi-precious stones with softer surfaces or those that have been chemically treated by the jewelry designer, such as amber and turquoise.
Turn an ordinary picture frame into a great looking jewelry organizer! The process is pretty simple, remove the back parts of picture frame that help it to stand alone and just paint the cardboard and refit again! Paint the cardboard in paint colors you like and finish with a gold leaf as shown! Now you can start using it as a jewelry organizer!
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.
Layered Earring DIY ~ The layered look of these earrings is fabulous!  Can you believe that they are felt?  Simply trace and cut the desired shape on felt and attach to fish hooks.  How simple yet elegant!  2.  DIY Tassel Earrings ~ Tassels aren’t just for curtain tie backs or lamp shades.  I think they are perfect for earrings too!  Simply use your choice of chain whether it’s gold, silver or bronze and tie it off with matching wire.  If you desire a punch of pizzazz you can add some colored thread!  3.  DIY Patinaed Filigree Earrings ~ These patinaed filigree earrings are absolutely fabulous!  And of course, very stylish!  Learn how to patina earrings with a technique using craft acrylic paint, distressing and clear spray paint.

DIY Sculpey Bead Necklace ~  This Sculpey bead necklace DIY tutorial is so clever! Use this fabulous post to create a stylish necklace, perfect for gift giving that can be worn both casually or dressy! 47.  Braided Rhinestone Necklace {Necklaces} ~ This braided rhinestone necklace is right on trend with bling plus neon! Learn how to update a classic looking rhinestone necklace with this fabulous tutorial! Perfect for daughter and mother!
Aren’t you tired of keeping all your necklaces in a box where they get all tangled up? It’s about time you did something about that. A necklace holder would surely help. There’s no need to go shopping for one. You can put together something yourself. We’re ready to show you 12 easy and inspiring projects, all representing DIY necklace holders. Each of them can be personalized and customized in various ways so don’t suppress your creativity.

If the jewelry is very dirty or very tarnished – like silver or gold – then you may need to repeat the process so just add a little more baking soda and more boiling water – but make sure it’s boiling, that’s key!  You can also use a toothbrush to get in all the nooks and crannies of detailed jewelry. Be careful with precious gems, stones and metals.


Pegboards are great for organizing just about anything and jewelry is certainly no exception. A piece of pegboard is really cheap and you can use it to create a beautiful jewelry organizer that will hold all of your necklaces, rings, earrings, and bracelets. Just frame the pegboard (if you want) and then add hooks, cups, small baskets, and anything else that you need to keep that jewelry organized. You can hang necklaces from hooks and use plastic cups or baskets to keep your rings organized. Really, there are so many ways that you can put a pegboard to work keeping things organized.
Seashells are one of the best natural materials to make jewelry as they are very cheap and look awesome. Besides, you can find seashells when you go to the beach. Take two shells and make holes in shells and attach 2 jump rings and 2 earring hooks. The final step is to glue pearls. Done! You can use different kinds of shells and pearl beads for more variation. Also, you can use beads to decorate earrings.
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.
×