Get crafty with some wood and wooden tools if you want some permanent and ultimate jewelry storage solutions! This wooden jewelry organizer comes with a shelf, an earring tray and also with an necklace rack! All in one jewelry organizer, comes with a shelf also that can hold well the ring dishes and bangle displays! Shelf can hold your decorative crafts and even the mural and picture frames! A super easy-to-build but smart jewelry organizer for jewelry lovers!
Bottlecap Necklaces {tutorial and free download}~ Making bottle cap necklaces never looked so easy.  All you need are bottle caps and epoxy stickers, a necklace chain, hot glue, and the fun download found at kiki creates! 69.  Bottle Cap Necklace Tutorial ~   Making a  flattened bottle cap necklace is easy, cheap, and a great gift!  It only takes a few minutes, and you just need a few common tools like a hammer and needle nose pliers!

A piece of radiator grate in a frame is perfect for holding those dangling earrings. You just have to cut the grate to fit your wooden frame, assemble it and then hang up your earrings. These are great because they are so decorative and you can paint them if needed so that they match your bedroom décor. You could make a few of them if you have loads of earrings to hang or think about using them as gifts for other girls you know that need to get those dangly earrings organized.
Some old drawer pulls and other hardware can be attached to a board to give you the perfect place for keeping all of your jewelry organized. You need a board, which you can paint or stain any color that fits your current décor. Then just take those old drawer pulls, hinges, and knobs (which incidentally, you can pick up at yard sales and thrift stores for a steal) and attach them in different ways. Create a pattern or just put them wherever you think they’ll work best. You get a beautiful place to store and display all of your jewelry and for very little cost.
A piece of radiator grate in a frame is perfect for holding those dangling earrings. You just have to cut the grate to fit your wooden frame, assemble it and then hang up your earrings. These are great because they are so decorative and you can paint them if needed so that they match your bedroom décor. You could make a few of them if you have loads of earrings to hang or think about using them as gifts for other girls you know that need to get those dangly earrings organized.
An old Jenga game is the perfect place to begin organizing your jewelry. If you don’t have an old Jenga set, you can pick them up for less than $10 and they make a really neat looking display for your necklaces. Paint or decorate the wooden blocks if you want and then just put them together, holding them in place with strong glue. Hang it on the wall and you have a really modern looking necklace holder that is as fun to make as it is functional to use and it will keep those necklaces from tangling in the jewelry box.

How about a necklace holder that has industrial flair? You could easily make one out of some copper pipe pieces and some copper end caps and fitting adapters. You’ll also need a piece of wood to use as a support for the whole thing. You can mix and match the pipes and fittings however you want so be creative and give it an interesting, geometric structure. Check out ehow for more details.
Embellished Resin Rings ~ These rings are similar to the resin rings I featured above but with a bit more bling and sophistication! I think I’d better go out and buy some Mod Podge Dimensional Magic stat.  I am in LOVE with these rings! 25.  Resin Ring Tutorial ~  This resin ring is a bit different in that it uses photos or photo paper for the design on the ring.  I love the idea of a photo ring! 26.  Fork Ring Jewelry Tutorial ~ There are so many fun uses for this great tutorial.  You could use this as a craft activity for a class or youth group.  Or you could also make a sentimental gift for a new bride or parent having an anniversary using one of their wedding silverware. 27.  DIY Girl’s Flower Ring ~ This craft is easy enough the kids could make one too!  Just get  your hands on some cute buttons, and turn them into these fun rings, with the band made from a stretchy headband.  I think this would be an especially cute gift for a young teen.

Wood floor samples are around a quarter each at your local home improvement store. You can use a few of these to create a beautiful jewelry organizer that will hang on the wall. You need a collection of samples (or you could just use a board if that’s what you have on hand), wood glue, a few screws and something to hang it – Velcro picture strips work well. The screws (and you can buy decorative ones if you want) are what holds all those necklaces and keeps them from getting tangled. Just hang it in the bedroom or bathroom and you’ll always have your necklaces perfectly organized.
Time to put an end to your jewelry storage issues! We are not talking about to buy expensive jewelry organizer that makes you left with no money in pockets! Here, you all need to get creative with your hands and imaginations to build your own stylish and praise-worthy DIY jewelry organizer! Wishing to you find your necklace untangled always? Want a lovely jewelry display for your rings or earrings? These 100 DIY jewelry organizer or holder ideas will be total help to make your unique jewelry holder or storage box without causing any load to your wallet!
Felt Flower Rings ~  Not only are these rings absolutely adorable, they are super easy to make and only require a quick trip to the craft store and a little hot glue.  Now that’s my kind of easy-peasy project!  {wink}  18.  Button Statement Ring ~ These big and bold statement rings are fantastic!  You can pick up a package of 8 ring flats at Michael’s for only $3.19.  Use your E-6000 glue to adhere the buttons to the ring flats.  That’s it!  Easy peasy.  19.  Resin Rings~ I adore that these rings are made with items you may  have at home already like that bottle of Mod Podge!  You’ll need Mod Podge Dimensional Magic, Mod Podge, a strong glue, ring blanks, coins, scrapbook paper of your choice and embellishments of your choosing.   Think how unique every ring will be!  Love this 10 cent ring idea!  20.  Polymer Clay Rose ~ This tutorial shows you how to make one of the hugely popular polymer clay roses that everyone seems to be wearing.  Instead of putting it on a necklace, however, just adhere to a ring blank!

DIY Confetti Earrings ~ Create your own gorgeous paper confetti earrings with a few items.  All you need is a hole punch, hot glue, thin wire and earring hooks.  They are definitely delicate, but who cares when you paid next to nothing for them. 15.  How to Make Paper Earrings ~ Colorful dangly earrings are a fun accent to any outfit.  They are even better when they are light weight and don’t pull on your ear lobes.  These amazing earrings are made from card stock.  You can cut your desired shape from a paper punch, Cricut or Silhouette and add a layer of crystal accents.

Now it is an age of glamour and fashion! Both genres just prefer to manage somehow all the fashion-worthy materials and stuff in their wardrobes for everyday bigger fashion statements! After the dress ware and footwear, the matching jewelry is the most desirable things for the fashion lovers! The celebrity inspired and designer’s jewelry items in the market have sky-high prices, enough to kill your budget! If you are really want to trim down your jewelry expenditures then you can simple use your creative brain and crafty hands to design your own beautiful jewelry items at home you see in boutiques! We are offering here this list of 25+ DIY jewelry projects which are all our favorite and they are definitely going to win your heart too! These amazing DIY jewelry ideas are just best to try when being on a budget!
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
×