An old embroidery hoop and a few strips of lace give you the perfect place to hang and organize your earrings. You don’t even have to glue this one. Just separate the hoop and place the lace ribbon inside before putting it all back together. The hoop hangs perfectly on the wall and you can add as much lace as you need to keep all of your earrings organized. It’s beautiful, easy to make, and best of all, cheap. You can literally make one of these in about five minutes and if you have the hoop and lace on hand, it won’t cost you anything. You could also use strips of fabric if that’s what you have.
A thin wooden dowel mounted inside a closet or cabinet door using cup hooks is the foundation of a simply chic jewelry hanger. Coat the dowel with semigloss paint.
Your jewelry will be noticeably cleaner after just the soak. It will even be disinfected, too. Adding the baking soda scrub at the end will ensure that you get everything clean, especially in all the little crevices. If your kitchen faucet has a high-pressure setting, that will be the best thing to use for rinsing your jewelry. Just make sure you hold on tight, because searching for lost objects in the sink trap or garbage disposal is one of the least pleasant tasks in the world. Take my word for it. Consider using a strainer.
We would wish to clone this project if you want a stylish, dust-free and secure jewelry organizer! Use the wood in stock to build a DIY jewelry organizer with custom storage compartments and columns! Now use an old crib-side to install the door to it! Install crib side as door using hinges and don’t forget to write custom quotes over it! Would gift a perfect gift for a wife!
For starters, consider repurposing a spice rack into a necklace holder. It would be an easy transformation. All you’d need to do is stain or paint the rack and then screw in some hooks. When you’re done, install it on the wall. IKEA Bekvam racks have this rod that can come in very handy when hanging necklaces or bracelets.
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
I just tried this on my Tiffany’s heart and ball chain and realized after I started boiling the water I was out of baking soda…put the vigenar and salt in the boiling water anyways and poured into the pan. Wosrt thing that I figured could happen would be it wouldn’t work and I wasted a little vinegar and water..as i pourd the steaming hot liquid into the pan I WATCHED it get cleaned instantly. This works without the baking soda! I wished I had taken a video of it! Coolest thing to see happen! Thank you!
Whether you’re a DIY maven or a design-obsessed fashionista, there’s a good chance that you’ve spotted the druzy trend. Never heard of the term before? Druzy refers to the glittering layer of tiny crystals on a rock or stone. Luckily, you don’t have to be a geologist to discover the sparkle. Mix up some glitter, add a little decoupage, and follow this tutorial for a pair of faux druzy earrings.
When your favorite bling just doesn't have the same sparkle, instead of purchasing expensive cleaning solutions or bucking out for a professional scrubbing, try this easy DIY jewelry cleaner. Using ingredients you already have in your pantry, this concoction costs pennies to make and doesn't use any harsh chemicals — just the power of science. And you can give your old toothbrush a new life by gently scrubbing jewels postsoak. Before you know it, your special gems will be dazzling.
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
×