A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.

Get creative with the pinewood stripes and hardwood plywood to install ultimate DIY jewelry organizer just like this inset jewelry cabinet! Here both cabinet and its hinged door have been planned for stylish storage and display of jewelry items! Don’t forget to install a ring tray inside for cool ring collection display! This self-made wooden cabinet is just like the bathroom cabinet and comes with the mirror-paneled door!


Select a mild cleaning agent for your homemade jewelry cleaner recipe. Dish soap with grease-cutting properties can be used, but skip dish soap with harsh anti-bacterial properties as this can strip the finish off jewelry surfaces. Dish soap is a good idea for semi-precious stones with softer surfaces or those that have been chemically treated by the jewelry designer, such as amber and turquoise.
A necklace holder can be as simple as a wooden board with some knobs on it. Actually that’s a pretty good description of the project showcased on asmithofalltrades. As you can probably anticipate, you don’t need many things if you want to make something similar. So go find yourself a board, stain it or paint it, drill two holes in two of its corners so you can hang it and screw in a few knobs. You can mix and match them however you want.
I have a great jewelry polish that is super simple. Take a small piece of aluminum foil, about 1″ square, and put it in the bottom of a coffee cup. Add about a T of baking soda. Pour boiling water over it and dunk your jewelry. You can drop it in and swirl it around, or you can just dunk it a few times and it cleans any tarnish off in seconds. I like to put a twist tie or string on the jewelry and then just dunk it. When I pull it out, sometimes there are some little dark spots. I just rub them out with my finger. This works well on tarnished silver dishes or tableware as well.
Your jewelry will be noticeably cleaner after just the soak. It will even be disinfected, too. Adding the baking soda scrub at the end will ensure that you get everything clean, especially in all the little crevices. If your kitchen faucet has a high-pressure setting, that will be the best thing to use for rinsing your jewelry. Just make sure you hold on tight, because searching for lost objects in the sink trap or garbage disposal is one of the least pleasant tasks in the world. Take my word for it. Consider using a strainer.
The framed jewelry organized featured on monaluna is both elegant and practical. Notice that it has a thin storage tray at the bottom. It’s useful for storing pendants, rings and other small jewelry pieces and accessories. We also like the fact that the frame and the back panel were painted all white. If you want, you can use some sandpaper to create a distressed, vintage look.
How about a necklace holder that has industrial flair? You could easily make one out of some copper pipe pieces and some copper end caps and fitting adapters. You’ll also need a piece of wood to use as a support for the whole thing. You can mix and match the pipes and fittings however you want so be creative and give it an interesting, geometric structure. Check out ehow for more details.

Wood floor samples are around a quarter each at your local home improvement store. You can use a few of these to create a beautiful jewelry organizer that will hang on the wall. You need a collection of samples (or you could just use a board if that’s what you have on hand), wood glue, a few screws and something to hang it – Velcro picture strips work well. The screws (and you can buy decorative ones if you want) are what holds all those necklaces and keeps them from getting tangled. Just hang it in the bedroom or bathroom and you’ll always have your necklaces perfectly organized.


An old frame can be repurposed into a necklace holder and in case you can’t find a suitable frame you can always build one from scratch using a plywood panel and some scrap wood pieces. You’ll also need some fabric but you can also use paper if you want. In any case, you that to cover the plywood panel so you can have a clean backdrop for the necklaces to contrast with.
Prefer the dollar store items also to install vintage inspired and precious shabby chic DIY jewelry organizer! Install earring pyramid using brass tubes and wire! Go handmade also with polymer clay to make artful jewelry organizer like the given cactus jewelry organizer! Make use of concrete, paper mache and also that of plaster to make every stunning jewelry dishes for free! More unique DIY jewelry organizer you can build with your own hands is waiting for your below! Give your worthy 2 minutes to a short roundup of these individual handmade DIY jewelry organizer!!!
×