How about a necklace holder that has industrial flair? You could easily make one out of some copper pipe pieces and some copper end caps and fitting adapters. You’ll also need a piece of wood to use as a support for the whole thing. You can mix and match the pipes and fittings however you want so be creative and give it an interesting, geometric structure. Check out ehow for more details.
This fun DIY projects are mostly for women, but you can surprise your wife making a wonderful organizer for her jewelry. Fill your spare time with something fun and interesting as these creative projects. They will not take a long time and will cost you almost nothing. So you will have more benefits- any time you will know where is your favorite piece of jewelry and you will have beautiful decorations on your walls. For saving your time and your patience every time when you will need jewelry, all you need is some old unused item, a little effort and imagination.
Okay… so I was unpacking and going through some of my jewelry … AND…. I found that all of my inexpensive jewelry that has been sitting in my jewelry box was tarnished and yucky and dirty! I forgot I even had some of it! So… I began a search for some kind of homemade jewelry cleaner so I didn’t have to go buy some! I stumbled upon this jewelry cleaner recipe using only boiling water and baking soda so I thought WTH I’ll try it…. AND…. It was like magic! Even my yucky, tarnished CTR ring that I LOVE was Sparkly clean and looked brand new! It made me very happy so I thought I’d share my find! Here’s the recipe below!
This works great, but be careful with gem stones. Some of them like amethyst and emerald and any others which are in the quartz family are heat sensitive. Just put them in once the water has cooled down some. Cubic Zirconia are fazed by anything. They are lab grown under high heat and pressure. I fire them in a kiln at 1650 degrees in silver metal clay jewelry, and they are bothered at all.
If the jewelry is very dirty or very tarnished – like silver or gold – then you may need to repeat the process so just add a little more baking soda and more boiling water – but make sure it’s boiling, that’s key!  You can also use a toothbrush to get in all the nooks and crannies of detailed jewelry. Be careful with precious gems, stones and metals.

A strip of lace can do wonders for helping you to keep earrings organized. The greatest thing about this project is how it looks so rustic and antique. That’s done using teabags to stain the lace and give it an old-word feel. There are very few supplies needed and if you have enough lace, you can create several of these and just hang them all together to keep all of your earrings organized. It’s a beautiful, easy project that will take very little time but instantly improve your bedroom or bathroom décor just by having it hanging there.
These fun DIY jewelry ideas are the perfect easy craft for teens to make. They make great DIY gifts and they also are the perfect crafts to sell to make a little cash on the side! I love these crafty project because you don’t need a lot of fancy supplies to make most of the DIY jewelry making projects. Check out the easy to follow step by step instructions below.
Every woman or a style loving girl on earth wants to wear the jewelry! For everyday new style statements, the jewelry matching to your dress up is the very first demand! It is not batting at all to have a lot of jewelry, and the problem is the wrong ways to store the jewelry! While not having a better jewelry holder or DIY jewelry organizer ideas, most girls and women tend to store their all jewelry items in a box or a specific drawer; this results in a big mess! Sometimes it also causes significant damage to your expensive jewelry items!

Okay… so I was unpacking and going through some of my jewelry … AND…. I found that all of my inexpensive jewelry that has been sitting in my jewelry box was tarnished and yucky and dirty! I forgot I even had some of it! So… I began a search for some kind of homemade jewelry cleaner so I didn’t have to go buy some! I stumbled upon this jewelry cleaner recipe using only boiling water and baking soda so I thought WTH I’ll try it…. AND…. It was like magic! Even my yucky, tarnished CTR ring that I LOVE was Sparkly clean and looked brand new! It made me very happy so I thought I’d share my find! Here’s the recipe below!
If you have a few pieces of chicken wire on hand, you can create an absolutely stunning hanger for your earrings and other jewelry. You’ll need a one-by-two foot piece of chicken wire as well as a few pieces of wood to build the frame. The framed holder hangs with a piece of ribbon or whatever you want to use to hang it and it costs only about $2 to make. Plus, it’s relatively easy and will hold loads of jewelry. Add a few small nails or hooks to the wooden part for holding necklaces and bracelets and your earrings will just hang across the wire in the center.
Every fashion enthusiast will love these diy jewelry ideas as they offer no expensive supply materials! Most of the needed items will be available in home or at a dollar store! After you browse the whole collections of these smart DIY jewelry ideas, you will be able to make your own stunning bracelets, mesmerizing bangles, exotic earrings and very stylish necklaces!
Read Before You Start!: Gather your ingredients and line your pan with a sheet of foil (shiny side up). Lay out your dirty jewelry and have each part of the jewelry touch the foil. Not sure why this is important, but apparently it is. (Note: I cleaned my silver, 14k white gold and even a diamond ring without any problems. I don’t recommend using this cleaner on stones like opals and pearls. Not sure what the reaction would be to these types of natural stones.)
I have a great jewelry polish that is super simple. Take a small piece of aluminum foil, about 1″ square, and put it in the bottom of a coffee cup. Add about a T of baking soda. Pour boiling water over it and dunk your jewelry. You can drop it in and swirl it around, or you can just dunk it a few times and it cleans any tarnish off in seconds. I like to put a twist tie or string on the jewelry and then just dunk it. When I pull it out, sometimes there are some little dark spots. I just rub them out with my finger. This works well on tarnished silver dishes or tableware as well.

DIY Sculpey Bead Necklace ~  This Sculpey bead necklace DIY tutorial is so clever! Use this fabulous post to create a stylish necklace, perfect for gift giving that can be worn both casually or dressy! 47.  Braided Rhinestone Necklace {Necklaces} ~ This braided rhinestone necklace is right on trend with bling plus neon! Learn how to update a classic looking rhinestone necklace with this fabulous tutorial! Perfect for daughter and mother!
A piece of radiator grate in a frame is perfect for holding those dangling earrings. You just have to cut the grate to fit your wooden frame, assemble it and then hang up your earrings. These are great because they are so decorative and you can paint them if needed so that they match your bedroom décor. You could make a few of them if you have loads of earrings to hang or think about using them as gifts for other girls you know that need to get those dangly earrings organized.
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.
×