Presto! This works like MAGIC! I’m a jewelry-maker, and sometimes generous friends bestow me with old costume jewelry that I love to take apart and repurpose. I received just such a lot the other day, but the pieces I was interested in were dull and discolored and tarnished. Since I didn’t pay anything for them, and since they were useless to me in their present condition, I figured I’d try this.

Reclaim the old boxes from home and fill them soft with felt folds! This will turn them into ever beautiful ring boxes! You can make use of different accents, glitter and metallic papers to personalize the final appeal of your finally finished ring box! The given box is inspired of Gatsby and is perfect inspiration for DIY jewelry storage systems! Complete details here whimseybox


There is no woman or girl who didn`t love jewelry. It is good to have a lot jewelry but it is better if you know every time where is your favorite pair of earrings or your favorite necklace. If you keep your jewelry in boxes it is possible to make a big mess and damage or entangled your jewelry. Put an end to your nervousness every time you`ll look for a piece of jewelry- make an impressive wall jewelry organizer.

IY Colorblock Earrings ~ Revamp your plain hoop earrings with some embroidery thread.  All you have to do is wrap the thread around the earring and super glue your ends to keep from coming loose. 7.  DIY Rhinestone Earrings ~ Look at these gorgeous hoop earrings!  I love the mixtureof rhinestone chain and eye pins that hangs from the hoops.  The step by step tutorial is so easy to follow, if you have not made jewelry before this post will definitely inspire you to give it a try.


Keeping your costume jewelry in excellent shape is easy. All it takes is a little bit of time and some effort. If you wear your pieces every day, you will need to clean it more often. To get your costume jewelry looking like new, you need to find a good cleaning solution. It is essential you avoid cleaners that contain acids and alcohols, like vinegar and ammonia as they can damage the materials in the jewelry.
I have a great jewelry polish that is super simple. Take a small piece of aluminum foil, about 1″ square, and put it in the bottom of a coffee cup. Add about a T of baking soda. Pour boiling water over it and dunk your jewelry. You can drop it in and swirl it around, or you can just dunk it a few times and it cleans any tarnish off in seconds. I like to put a twist tie or string on the jewelry and then just dunk it. When I pull it out, sometimes there are some little dark spots. I just rub them out with my finger. This works well on tarnished silver dishes or tableware as well.
An old wooden coat hanger can be transformed into the perfect jewelry organizer with a few small hooks and maybe some decorative ribbon. First, decorate the hanger however you want, if you want. Then add tiny command hooks for holding necklaces and bracelets. You can stick the hooks into the wood all the way around the hanger and even on both sides if you want. You get loads of space for hanging your jewelry and a wooden hanger will cost only a few cents at thrift stores so this is a really cheap project as well.
Instead of buying a cheap plastic ring holder or spending a fortune on a not-so-cheap one, why not just create your own whimsical plaster hand to keep rings and bracelets organized? This is such a fun project and would make the perfect gift (the holidays are just around the corner, you know). You will need plaster of course, plus a mold and paint if you want to paint it. The great thing is that you can use rubber gloves as a mold and they are much cheaper than a real mold. This is the perfect thing for the dresser and will really help you to keep your rings and bracelets organized.

DIY Sculpey Bead Necklace ~  This Sculpey bead necklace DIY tutorial is so clever! Use this fabulous post to create a stylish necklace, perfect for gift giving that can be worn both casually or dressy! 47.  Braided Rhinestone Necklace {Necklaces} ~ This braided rhinestone necklace is right on trend with bling plus neon! Learn how to update a classic looking rhinestone necklace with this fabulous tutorial! Perfect for daughter and mother!
The first evidence you’re going to have that this homemade jewelry cleaner worked will be all the stuff floating around in your vinegar/tea tree oil liquid. The last time I put my jewelry in this mixture I didn’t think it was too dirty, and it didn’t exactly need cleaning. Within just a few minutes, though, there was so much stuff floating around in the water that I was appalled.
Ladies: I see a lot of you saying it didn’t work for you. I wonder if you’re trying to clean PLATED silver jewelry or silver-TONE jewelry? If it’s not actual silver (usually denoted by the piece being stamped somewhere in the metal with “.998”) your problem may be that your jewelry finish is wearing off, instead of it just being tarnished. Think of it as trying to clean a stain off a painted wall vs “cleaning” a section of that wall where the paint has been peeled off. You can’t wash paint back onto the wall if it’s peeled off, you have to repaint it. In the case of plated or silver toned jewelry, you’ll need that jewelry to be re-dipped into a silver plate or coating to restore its luster.

Taking an old cigar box and an old sweater, you can make a great ring holder that not only organizes your rings, it protects them as well. What you end up with is a ring display that looks a lot like what you see in the jewelry store, only a lot cheaper. This project is easy and only takes about an hour or so from start to finish. You end up with a place where you can slide your rings in to keep them from being lost or knocked around in the jewelry box. You could also use this to stick your stud earrings in and keep them from being misplaced.

DIY Lace Ring ~ This dainty lace ring is not only pretty, but so simple to make.  Only two items are needed, ribbon lace and fabric stiffener. Lace Doily Ring ~ Accent any outfit with these adorable doily rings.  If you don’t want to use a doily you can use lace or crochet trim.  They would make wonderful Christmas or birthday presents for tweens, teens and women.
This fun DIY projects are mostly for women, but you can surprise your wife making a wonderful organizer for her jewelry. Fill your spare time with something fun and interesting as these creative projects. They will not take a long time and will cost you almost nothing. So you will have more benefits- any time you will know where is your favorite piece of jewelry and you will have beautiful decorations on your walls. For saving your time and your patience every time when you will need jewelry, all you need is some old unused item, a little effort and imagination.
A piece of radiator grate in a frame is perfect for holding those dangling earrings. You just have to cut the grate to fit your wooden frame, assemble it and then hang up your earrings. These are great because they are so decorative and you can paint them if needed so that they match your bedroom décor. You could make a few of them if you have loads of earrings to hang or think about using them as gifts for other girls you know that need to get those dangly earrings organized.

The first evidence you’re going to have that this homemade jewelry cleaner worked will be all the stuff floating around in your vinegar/tea tree oil liquid. The last time I put my jewelry in this mixture I didn’t think it was too dirty, and it didn’t exactly need cleaning. Within just a few minutes, though, there was so much stuff floating around in the water that I was appalled.
Unlike other precious metals, gold doesn’t tarnish over a period. That doesn’t mean, however, that you don’t need to keep it clean. The oils and dirt from your hands can quickly make it look dull. The baking soda, salt, and aluminum foil used to create this homemade gold jewelry cleaner generate a chemical exchange called an ion transfer, which is a natural way to clean metals.
be careful with the white gold, most of it is plated with rhodium (a metal in the platinum family); white gold itself is dull, and this is done to make it shiny. I had a jeweller in the family, and got my original wedding band from him, many years ago. When he asked if I wanted it plated, I said no. I’m sure my face was a treat when I first saw it; it was immediately plated! This method of cleaning might remove the plating eventually. I’d check with a jeweller before doing it too often.
We would wish to clone this project if you want a stylish, dust-free and secure jewelry organizer! Use the wood in stock to build a DIY jewelry organizer with custom storage compartments and columns! Now use an old crib-side to install the door to it! Install crib side as door using hinges and don’t forget to write custom quotes over it! Would gift a perfect gift for a wife!
×